Department of Mechanical Engineering
Mechanical Engineering is one of the most important majors in the professions and job opportunities in the world. It is entirely involved in the design, development and construction of all moving and non-moving devices and also the systems which are created by the technology each day. The mechanism of all operating machines as well as the production of power are subjects under consideration in Mechanical Engineering. Strong creativity, research, design, developments, test, manufacture and sale of equipment for these purposes are the basic issues of concern for a Mechanical Engineer.
Students of Mechanical Engineering learn about Materials, Solid and Fluid Mechanics, Thermodynamics, Heat Transfer, Control, Instrumentation, Design, and Manufacturing to understand mechanical systems. Specialized Mechanical Engineering subjects can be classified into Biomechanics, Cartilage-Tissue Engineering, Energy Conversion, Laser-Assisted Materials Processing, Combustion, MEMS, Microfluidic Devices, Fracture Mechanics, Nanomechanics, Mechanisms, Micropower Generation, Tribology (Friction and Wear), and Vibrations.
The Department of Mechanical Engineering at the Ferdowsi University of Mashhad was established in 1986. Its general aim is to train professionals and researchers highlighting, broadening and deepening their knowledge in a particular context. Its objective is to study the latest scientific achievements in a particular field, to acquire management skills and to identify research methods. The Bachelor’s program at the Department of Mechanical Engineering was founded in 2006. An undergraduate student will start with an introduction to key Mechanical Engineering topics, such as Statics and Dynamics, Thermodynamics, Fluid Dynamics, Stress Analysis, Mechanical Design and Technical Drawing. As the course progresses, there should be more opportunities to specialize in a particular field within which Mechanical Engineering skills are applied, such as Vehicle Design, Robotics, Nanotechnology or Energy.
Masters students at the Department of Mechanical Engineering will be able to study in any of the following areas: Applied Design, Energy Conversion, Manufacturing and Prod., Aerospace (Aerodynamics), Aerospace (Aerospace Structures), Aerospace (Propulsion) branches of this field. This course duration is for two years and it covers two main areas of education and research.
The highest level of degree awarded at the Department of Mechanical Engineering is the Ph.D. degree which may also be called a Research Degree or a Doctorate. The course consists of a coordinated set of educational and research activities. The aim of the Ph.D. program, which started in 1997, is to train and educate individuals capable of expanding the frontiers of knowledge in their specialty. Being familiar with methods of advanced research as well as the latest foundations of education, Ph.D. students are able to innovate in science and technology fields. Ph.D. students admitted to this department can study in branches of Mechanical Engineering namely Applied Design (Solid Mechanics), Applied Design (Control Dynamics and Vibration) Energy Conversion, Aerospace (Aerodynamics), Aerospace (Aerospace Structures). More
 |
Masoud Tahani |
| Professor |
|
| Department of Mechanical Engineering | |
| mtahani@um.ac.ir | |
| +985138806056 |
| Areas | Bachelor's | Master's | Ph.D |
|
Mechanical
Engineering
|
 |
- |
- |
| Mechanical Engineering-Manufacturing | - | |
- |
| Mechanical Engineering-Applied Mechanics | - |
|
|
| Mechanical Engineering-Energy Conversion | - |
|
|
| Aerospace Engineering-Aerospace Structures | - |
|
|
| Aerospace Engineering-Aerodynamics | - |
|
|
| Aerospace Engineering-Propulsion | - |
|
- |
Academic staff
Research
Recent journal articles
Jinghua Li, Hatami, M., Yalong Huang, Bing Luo, Dengwei Jing, & Lijing Ma (2023). Efficient photothermal catalytic hydrogen production via plasma-induced photothermal effect of Cu/TiO2 nanoparticles. International Journal of Hydrogen Energy, 48 (16), 6336-6345.
Arasteh, M., Azargoon, Y., & Djavareshkian, M. (2023). Ground effect on the aerodynamics of a flapping wing in forward flight: an experimental study. Aircraft Engineering and Aerospace Technology, 95 (4), 525-534.
Naderinezhad, M., & Djavareshkian, M. (2023). Numerical study of the effect of winglet on the aerodynamic performance of sinusoidal and simple leading-edge wings. Aircraft Engineering and Aerospace Technology, 95 (4), 512-524.
Afsharfard, A., Jafari, A., Ayoubi Rad, Y., Haniyeh Tehrani, & Kyung Chun Kim (2023). Modifying Vibratory Behavior of the Car Seat to Decrease the Neck Injury. Journal of Vibration Engineering Technologies, 11 (3), 1115-1126.
Momeni-khabisi, H., & Tahani, M. (2023). Coupled thermal stability analysis of piezomagnetic nano-sensors and nano-actuators considering the flexomagnetic effect. European Journal of Mechanics A-Solids, 97 (1), 104773-104773.
Aghil Iranmanesh, & Passandideh-fard, M. (2023). Two-dimensional modelling of free-surface flows in presence of a spherical object using the Modified Volume of Fluid technique. Marine Systems & Ocean Technology, 17 (), 123-134.
Arhami, M., & Moeenfard, H. (2023). A modified strain gradient beam constraint model. Mathematical Methods in the Applied Sciences, 46 (3), 3384-3404.
Roohi, E., & Stefan Stefanov (2023). A comprehensive review on micro- and nano-scale gas flow effects: Slip-jump phenomena, Knudsen paradox, thermally-driven flows, and Knudsen pumps. Physics Reports, 997 (1), 1-60.
Ghadamkheir, K., J. Zareei, Xiaohu Yang, & Hatami, M. (2023). The effects of diesel-OME1 blended fuel on combustion characteristics of a heavy-duty compression ignition engine by a numerical study. Alexadria Engineering Journal, 64 (), 493-503.
Sina Alavi, Passandideh-fard, M., & Javad Mostaghimi (2023). Simulation of interfacial deformations for 2D axisymmetric multi-material flows. International Journal of Multiphase Flow, 158 (1), 104313-104313-12.
Rabizadeh, S., & Esmaeili, A. (2023). Hydro-optic interaction study on submerged unmanned underwater vehicles regarding to Snell's window. Ocean Engineering, 267 (1), 113224-113232.
Azargoon, Y., & Djavareshkian, M. (2023). Unsteady aerodynamics of flapping bionic eagle wings in forward flight: An experimental and numerical study. Proceedings of the Institution of Mechanical Engineers - Part C, 237 (9), 2090-2107.
Reza Naseri, Hiradfar, H., Shariati, M., & Kadkhodayan, M. (2023). Corrosion-fatigue resistance of ultrafine grain commercially pure titanium in simulated body fluid. Proceedings of the Institution of Mechanical Engineers, Part E, 237 (6), 2181-2191.
Saberi, M., & Ghandehariun, A. (2023). Experimental investigation of effective parameters on productivity improvement of the EDM process for corrosion-resistant metals. International Journal of Advanced Manufacturing Technology, 124 (1), 1763-1774.
Aldaghi, A., Banejad, A., Hadi Kalani, Mohammad Sardarabadi, & Passandideh-fard, M. (2023). An experimental study integrated with prediction using deep learning method for active/passive cooling of a modified heat sink. Applied Thermal Engineering, 221 (1), 119522-119522-17.
Yousefsani, S., & Zohoor, M. (2023). Bidirectional hyperelastic characterization of brain white matter tissue. Biomechanics and Modeling in Mechanobiology, 22 (2), 495-513.
Sajjad Hosseini, Afsharfard, A., Mehdi Rafati Zarkak, Abolfazli Esfahani, J., Seungho Kim, & Kyung Chun Kim (2023). Increasing vortex-induced vibration-based energy harvesting using a nature-inspired bluff body: An experimental study. European Journal of Mechanics B-Fluids, 97 (1), 1-11.
Shariati, V., Roohi, E., & Amin Ebrahimi (2023). Numerical Study of Gas Flow in Super Nanoporous Materials Using the Direct Simulation Monte-Carlo Method. Micromachines, 14 (1), 139-139.
Sheikhani, H., Ajam, H., & Ghazikhani, M. (2023). Experimental investigation of minimum total irreversibility in non-premixed combustion of different multi-branch burners by Taguchi analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45 (1), -.
Sabeghi, M., Moghiman, M., & Gandomzadeh, D. (2023). Experimental study of the effect of HHO gas injection on pollutants produced by a diesel engine at idle speed. International Journal of Hydrogen Energy, 48 (24), 9117-9126.
Tahani, M., E. Postek, L. Motevalizadeh, & T. Sadowski (2023). Effect of Vacancy Defect Content on the Interdiffusion of Cubic and Hexagonal SiC/Al Interfaces: A Molecular Dynamics Study. Molecules, 28 (2), 744-763.
E. Syerko, T. Schmidt, D. May, C. Binetruy, S.g. Advani, S. Lomov, L. Silva, S. Abaimov, N. Aissa, I. Akhatov, M. Ali, Asiyaban, N., G. Broggi, J. Bruchon, B. Caglar, H. Digonnet, J. Dittmann, S. Drapier, A. Endruweit, A. Guilloux, R. Kandinskii, A. Leygue, B. Mahato, P. Martinez-lera, M. Matveev, V. Michaud, P. Middendorf, N. Moulin, L. Orgeas, C.h. Park, S. Rief, M. Rouh, I. Sergeichev, M. Shakoor, O. Shishkina, Y. Swolfs, Tahani, M., R. Umer, K. Vanclooster, & R. Vorobyev (2023). Benchmark exercise on image-based permeability determination of engineering textiles: Microscale predictions. Composites Part A: Applied Science and Manufacturing, 167 (1), 107397-107397.
Moradi, A., Shariati, M. (2023). Experimental and numerical analysis of ratcheting behavior of A234 WPB steel elbow joints including corrosion defects. Proceedings of the Institution of Mechanical Engineers - Part L, 237 (2), 451-468.
Noori, Y., Teymourtash, A. (2023). Calculation of the phase separation rate in two‐phase flow of non‐Newtonian power‐law fluid and gas bubbles flowing inside the T‐ and Y‐junctions using random vortex method (RVM). Canadian Journal of Chemical Engineering, 101 (4), 2172-2188.
Zamani, P., Jaamialahmadi, A., & Lucas F.m. Da Silva (2023). Fatigue life evaluation of Al-GFRP bonded lap joints under four-point bending using strain-life criteria. International Journal of Adhesion and Adhesives, 122 (0), 103338-103352.
Bakhsh Zahmatkesh, B., Niazmand, H., & Kafshdare Goharshadi, E. (2023). Synergistic effect of Fe3O4 nanoparticles and Au nanolayer in enhancement of interfacial solar steam generation. Materials Research Bulletin, 162 (1), 112178-112188.
Khosravi, R., Zamaemifard, M., Safarzade, S., Passandideh-fard, M., Teymourtash, A. (2023). Predicting entropy generation of a hybrid nanofluid in microchannel heat sink with porous fins integrated with high concentration photovoltaic module using artificial neural networks. Engineering Analysis with Boundary Elements, 150 (5), 259-271.
Ghazi, T., Attar, M., Ghorbani, A., Alshihmani, H., Davoodi, A., Passandideh-fard, M. (2023). Synergistic effect of active-passive methods using fins surface roughness and fluid flow for improving cooling performance of heat sink heat pipes. Experimental Heat Transfer, 37 (6), 649-664.
Esmaeili, S., & Sepahi-younsi, J. (2023). Optimization of the target pressure distribution and inverse design of an axial turbine blade. Proceedings of the Institution of Mechanical Engineers - Part C, 237 (20), 4655-4665.
Noroozi, M., Afsharfard, A., & Tahani, M. (2023). Harvesting energy using simultaneous rotational and translational motions of a breakwater. Archive of Applied Mechanics, 93 (5), 2175-2189.
Freshteh Sotoudeh, S Mahmood Mousavi, Nader Karimi, Bok Jik Lee, Abolfazli Esfahani, J., & Mohammad K.d. Manshadi (2023). Natural and synthetic superhydrophobic surfaces: A review of the fundamentals, structures, and applications. Alexadria Engineering Journal, 68 (), 587-609.
Ekrani, S., Ganjezadeh, S., & Abolfazli Esfahani, J. (2023). Multi-objective optimization of a tubular heat exchanger enhanced with delta winglet vortex generator and nanofluid using a hybrid CFD-SVR method. International Journal of Thermal Sciences, 186 (), 108141-20.
Sayed Mehrdad Bathaei, Mohammad Parsa Ghofrani Maab, Golnaz Zarabian Ghaeini, Mirae Kim, Abolfazli Esfahani, J., & Kyung Chun Kim (2023). Combustion regime identification and characteristics of nitrogen-diluted ammonia with hot air oxidizer: Non-premixed counterflow flame. Thermal Science and Engineering Progress, 39 (), 101722-10.
Abolfazli Esfahani, J., Bashtani, I., & Kyung Chun Kim (2023). Hybrid CFD-ANN approach for evaluation of bio-inspired dolphins dorsal fin turbulators of heat exchanger in turbulent flow. Applied Thermal Engineering, 219 (), 119422-14.
Roohi, E. (2023). On the effects of hybrid surface wettability on the structure of cavitating flow using implicit large eddy simulation. Journal of the Taiwan Institute of Chemical Engineers, 148 (156), 104828-104856.
Afsharfard, A., Bazyar, N. (2023). Study Effects of the Floater Geometry on the Output Power of Ocean Wave Energy Harvesters. International Journal of Aeronautical and Space Sciences, 24 (4), 1102-1110.
Passandideh-fard, M. (2023). A numerical study on mitigation of sloshing in a rectangular tank using floating foams. Ocean Engineering, 277 (6), 114267-114267-23.
Moltani, A., Pasandidehfard, M. (2023). Experimental and numerical study of free surface effect on the ventilated cavitating flow around a surface vehicle model. Ocean Engineering, 268 (1), 113413-113427.
Torshizi, E., & Bradaran Rahimi, A. (2023). Flow and Heat Transfer from Rotating Horizontal Cylinder Floating in Stationary Fluid. Journal of Thermophysics and Heat Transfer, 37 (2), 320-330.
Nikkhoo, A., & Esmaeili, A. (2023). Effect of different aero-structural optimization in the commercial airplane. Journal of Computational Applied Mechanics, 52 (2), 268-284.
S Amir Korminejad, Me Golmakani, & Kadkhodayan, M. (2023). Experimental study on the tensile load-carrying capacity of steel/GFRP bonding in moisture and acidic environments at high temperature. Proceedings of the Institution of Mechanical Engineers - Part C, 237 (8), 1926-1940.
Foroutannia, A., Akbarzadeh Totonchi, M., Akbarzadeh Tootoonchi, A., & Tahamipour Zarandi, S. (2023). Adaptive fuzzy impedance control of exoskeleton robots with electromyography-based convolutional neural networks for human intended trajectory estimation. Mechatronics, 91 (), 102952-102952.
Elhami, S. (2023). Study on the double-pass electrochemical discharge machining process. Materials and Manufacturing Processes, 38 (7), 828-835.
Nikkhoo, A., & Esmaeili, A. (2023). Numerical Study of Geometrical Properties of Full-Span Tubercle Leading Edge Wing at Post-Stall Condition. Journal of Applied Fluid Mechanics, 16 (9), -.
Mohsen Tavallaei, Farzaneh-gord, M., Ali Jabari Moghadam, & Amir Ebrahimi Moghadam (2023). Parametric study and optimization of pillow-plate heat exchanger using multi-objective genetic algorithm and entropy generation minimization approaches. Heat and Mass Transfer, 59 (9), 1687-1706.
Sepahi-younsi, J., & Esmaeili, S. (2023). Source of buzz instability in a supersonic air inlet. Aerospace Science and Technology, 138 (), 108334-108334.
Naeim Naghavi, Akbarzadeh Tootoonchi, A., Khaniki, O., Kardan, I., & Ali Moradi (2023). Assist-As-Needed Control of a Hip Exoskeleton, Using Central Pattern Generators in a Stride Management Strategy. Journal of Intelligent and Robotic Systems, 107 (4), -.
Ghasemi Touran Poshti, A., Mohammad Ali Ansari, & Ayani, M. (2023). The Developed Conservation Element and Solution Element Method in Two-Dimensional Spherical Coordinate and Its Application to the Analysis of Non-Fourier Heat Conduction. Arabian Journal for Science and Engineering, 48 (9), 12371-12387.
Darbari, B., & Ayani, M. (2023). Heat transfer and deposition analysis of CuO-Water nanofluid inside a baffled channel: Two-phase Eulerian–Lagrangian method. Journal of the Taiwan Institute of Chemical Engineers, 148 (), 104827-.
Amin Rezaeian, Hafiz, H., Ali Moradi, Akbarzadeh Tootoonchi, A., & Mahla Daliri (2023). Thumb carpometacarpal joint reaction force during distraction: a cadaveric study. Journal of Hand Surgery: European Volume, 48 (4), 357-359.
Azargoon, Y., & Djavareshkian, M. (2023). Unsteady characteristic study on the flapping wing with the corrugated trailing edge and slotted wingtip. Aerospace Science and Technology, 139 (), 108402-.
Khosravirad, A., & Ayani, M. (2023). Comparative analysis of thermal damage to laser-irradiated breast tumor based on Fourier conduction and non-Fourier heat conduction models: A numerical study. International Communication in Heat and Mass Transfer, 145 (), 106837-106849.
Shams, Z., Moghiman, M., Mojtaba Baghban, & S. H. Pourhoseini (2023). Combustion, emission and radiative performance of diffusion flame: effect of graphene nanoparticles. Applied Nanoscience, 13 (9), 6237-6247.
Kamel Abbasnia, S., & Shariati, M. (2023). Experimental and numerical investigation of ratcheting behavior in seamless carbon steel 90◦ elbow pipe with small dimensions under constant internal pressure and in-plane cyclic bending. International Journal of Pressure Vessels and Piping, 204 (104974), 1-16.
L. Motevalizadeh, & Tahani, M. (2023). A Phenomenological Study of Chromium Impurity Effects on Lattice Microstrains of SnO2 Nanoparticles Prepared Using Sol–Gel Technique. Crystals, 13 (6), 919-931.
Mansourian, A., & Bradaran Rahimi, A. (2023). 3D Numerical investigation of flow and heat transfer from an immersed vertical cylinder with the constant rotation speed in an unbounded stationary fluid. Journal of Thermal Analysis and Calorimetry, 148 (16), 8071-8086.
Ghadimi, Z., & Hassani, B. (2023). An isogeometric degenerated shell formulation for geometrically nonlinear analysis of smart laminated shells. Acta Mechanica, 234 (3), 1065-1082.
Tahani, M., Eligiusz Postek, & Tomasz Sadowski (2023). Diffusion and Interdiffusion Study at Al- and O-Terminated Al2O3/AlSi12 Interface Using Molecular Dynamics Simulations. Materials, 16 (12), 4324-4335.
Masoomeh Shafaee, Kafshdare Goharshadi, E., Mohammadi, M., & Hasan Behnejad (2023). A highly efficient and sustainable photoabsorber in solar-driven seawater desalination and wastewater purification. RSC Advances, 13 (26), 17935-17946.
Moslem Sabouri, & Roohi, E. (2023). Inversion in Binary Gas Mixtures in Rarefied Flow Conditions: Direct Simulation Monte Carlo Solution and Comparison with the Analytical Solutions at Free Molecular Regime. Physics of Fluids, 35 (7), 072009-072009.
Salimi, J., Teymourtash, A., Aghdasi, M., & Lakzian Esmail (2023). Optimization of the surface heating for a stationary cascade turbine blade in wet steam flow. Thermal Science and Engineering Progress, 39 (), 101751-101751.
Davandeh, N., & Maghrebi, M. (2023). Leading Edge Radius Effects on VAWT Performance. Journal of Applied Fluid Mechanics, 16 (9), -.
Shariati, M. (2023). International Journal of Pressure Vessels and Piping 205 (2023) 104996 Available online 24 June 2023 0308-0161/© 2023 Elsevier Ltd. All rights reserved.Experimental and numerical investigation of ratcheting behavior of SS316L seamless straight pipe under cyclic internal pressure and in-plane cyclic bending. International Journal of Pressure Vessels and Piping, 5 (205), 1-14.
Moghaddas Zadeh, N., Farzaneh-gord, M., Amir Ebrahimi-moghadam, & William P. Bahnfleth (2023). Techno-economic assessment of a proposed novel hybrid system for natural gas pressure reduction stations. Process Safety and Environmental Protection, 178 (), 905-918.
Samane Ghandehariun, Ghandehariun, A., & Nima Bahrami Ziabari (2023). Performance prediction and optimization of a hybrid renewable-energy-based multigeneration system using machine learning. Energy, 282 (1), 128908-16.
Mohammad Hossein Abbaszadeh, & Sepahi-younsi, J. (2023). Computational study of multiphase flow in cement plant gas conditioning towers: a review. Advances in Cement Research, 36 (6), 272-292.
Miri, S., Farzaneh-gord, M., & Kianifar, A. (2023). Triple-objective MPSO of zeotropic-fluid solar ejector cycle integrated with cold storage tank based on techno-economic criteria. Energy, 283 (1), 128998-129018.
Moghaddas Zadeh, N., Farzaneh-gord, M., Amir Ebrahimi-moghadam, & William P. Bahnfleth (2023). ANN-based procedure to obtain the optimal design and operation of the compression chiller network – Energy, economic and environmental analysis. Journal of Building Engineering, 72 (1), 106711-106731.
Tavakoli, A., Farzaneh-gord, M., & Amir Ebrahimi-moghadam (2023). Using internal sinusoidal fins and phase change material for performance enhancement of thermal energy storage systems: Heat transfer and entropy generation analyses. Renewable Energy, 205 (), 222-237.
Hosseinzadeh, A., Shariati, M., Danial Ghahremani-moghadam, & Mohammad Reza Maraki (2023). Effect of Inter-Cavity Spacing and Heat Treatment in Friction Stir Processing/Welding (FSP/FSW) Al7075 Composites Containing Al2O3 and Graphene Nanomaterials using Charpy Impact Test. International Journal of Advanced Design and Manufacturing Technology, 16 (1), 81-88.
Vahab Okati, Ali Jabari Moghadam, Farzaneh-gord, M., & Mahbod Moein Jahromi (2023). 4E and Multi-criteria Optimization of a New Alternative Intercooling Method for Modified Brayton Cycle on the Operation of a Hybrid Energy System. Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, 48 (3), 881-906.
Tahani, M., Eligiusz Postek, & Tomasz Sadowski (2023). Investigating the Influence of Diffusion on the Cohesive Zone Model of the SiC/Al Composite Interface. Molecules, 28 (19), 6757-6757.
Esmaeili, A. (2023). Combined passive and active flow control for fixed-wing micro air vehicles. International Journal of Micro Air Vehicles, 15 (), -.
Mohammadi, A., & Djavareshkian, M. (2023). Advancing high-speed flow simulations: SAUSM – an innovative hybrid numerical scheme for shock stability and accuracy. International Journal of Modern Physics C, 35 (4), -.
Erfani-farsi -eidgah, E., Ghafoorian, M., -, -., Mortazavi, A., & Kianifar, A. (2023). Solar-thermal conversion and thermal energy storage of different phase change materials. Journal of Thermal Analysis and Calorimetry, 148 (16), 8051-8060.
Qusay Rasheed Al-amir, Hameed K. Hamzah, Farooq H. Ali, Hatami, M., Wael Al-kouz, Ahmed Al-manea, Raed Al-rbaihat, & Ali Alahmer (2023). Investigation of Natural Convection and Entropy Generation in a Porous Titled Z-Staggered Cavity Saturated by TiO2-Water Nanofluid. International Journal of Thermofluids, 19 (19), 100395-100395.
Safarzade, S., Yousefi, M., Kazemi, M., & Kianifar, A. (2023). Energy, exergy, and economic (3E) analyses of nanoparticle-enriched phase change material in an air–PCM heat exchanger applied for buildings free cooling. Journal of Thermal Analysis and Calorimetry, 148 (16), 8533-8545.
Akhlaghi Ardekani, R., Kianifar, A., & Ghafoorian, M. (2023). A hybrid study of a 4-stage compressed solar distiller based on experimental, computational and deep learning methods. Desalination, 568 (), 117016-117051.
Kolahan, F. (2023). Fatigue life simulation of AA7075-T651 FSW joints using experimental data. Engineering Failure Analysis, 154 (), 107690--.
Mohammadi, A., & Djavareshkian, M. (2023). Modified advection upstream splitting method: Revolutionizing accuracy and convergence speed in low-Mach flows. Physics of Fluids, 35 (10), -.
Zaree Jorshari, A., & Djavareshkian, M. (2023). A quasi-steady numerical modeling of wake capture for a hovering flapping wing. International Journal of Modern Physics C, 35 (5), -.
Abolfazli Esfahani, J. (2023). Effect of hydrogen concentration on the stabilization of premixed ammonia/hydrogen flames in a heated micro-combustor: numerical investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45 (6), -.
Akbarzadeh Tootoonchi, A. (2023). The second clinical study investigating the surgical method for the kineticomyographic control implementation of the bionic hand. Scientific Reports, 13 (1), -.
Saffarzadeh, H., & Djavareshkian, M. (2023). Coupled dynamic and thermal simulation of airfoil flap movement in turbulent flow using the lattice Boltzmann method. Physics of Fluids, 35 (11), -.
Attar, M., Kazemi, M., Salami, B., Noori, H., Passandideh-fard, M., Davoodi, A., & Mohammadi, M. (2023). Improving Thermal Management of CPU by Surface Roughening of Heat Sinks. Arabian Journal for Science and Engineering, 49 (2), 2153-2164.
Passandideh-fard, M. (2023). High Heat-Flux Removal From Topside-Cooled GaN Power Devices by Water-Jet Impingement Using 3-D-Printed Nozzles. IEEE Transactions on Components, Packaging and Manufacturing Technology, 13 (8), 1164-1173.
Rahmati, F., & Kolahan, F. (2023). Influence of Siliconized Zn-Graphene Oxide Complex Nanoparticles on the Microstructure and Mechanical Properties of AA5083: Focus on Gas Metal Arc Welding. Advances in Materials Science and Engineering, 2023 (), 1-14.
Roohi, E., & Alavi, S. (2023). Large Eddy Simulations of Cavitation around a Pitching-Plunging Hydrofoil. Physics of Fluids, 35 (12), 125102-125102.
Moghimi Esfand Abadi, M., Mohammadi, A., & Djavareshkian, M. (2023). Design and Analysis of Supersonic Inlet for Ramjet Engines: Aerodynamic Considerations and Performance Optimization. Journal of Aerospace Science and Technology, (), -.
Fathi, A. (2023). Investigation of the Damping Performance of a Shape Memory Alloy Beam. International Journal of Engineering,Transactions A: Basics, 36 (7), 1369-1382.
Fathi, A. (2023). Parameters Identification of a Generalized Prandtl-Ishlinskii Model for a Micro-Positioning Stage Using Mutual Shape Memory Alloy Actuators. Experimental Techniques, 48 (4), 585-597.
Fathi, A., & Morteza Dardel (2023). Mathematical modelling and experimental study of a novel planar micro-positioning stage using shape memory alloy actuators. Smart Materials and Structures, 32 (12), 125001-1255012.
Fathi, A. (2023). شناسایی یک مدل تعمیم یافته پرنتل-ایشلینسکی برای یک سکوی موقعیت دهی میکرونی با عملگرهای آلیاژ حافظ شکل. Journal of Solid and Fluid Mechanics, 13 (2), 15-25.
Marandi, S., Beidokhti, B., Sharifi, M., Mousavi Jarrahi, M., & Farshidianfar, M. (2023). Investigation of Microstructure and Wear Properties of Stellite 6 Laser Additive Manufactured Layers on Martensitic Stainless Steel Substrate. JOM, 75 (10), 4108-4114.
Abedini, R., Najafi, F., & Passandideh-fard, M. (2023). On enhancement of heat transfer from a spiral heater using ultrasonic waves: experiments and simulations. Journal of Thermal Analysis and Calorimetry, 148 (23), 13607-13627.
Moghimi Esfand Abadi, M., & Djavareshkian, M. (2023). Significance of Aviation Safety Its Evaluation and Ways to Strengthen Security. International Journal of Reliability, Risk and Safety: Theory and Application, 6 (2), 37-45.
Javadi, N., Mollazadeh Beidokhti, S., Vahdati Khaki, J., & Niazmand, H. (2023). Synthesis and post-heat treatment of complex compositions in Cu-Ti-O system: Phase investigation and optical properties. Materials Science and Engineering B, 292 (1), 116393-116412.
Moeenfard, H., Zohuri, G. (2023). Optimization of Acoustic Performance of EPDM-based Foams Using Taguchi Design of Experiments: The Appropriate Content of Additives. Polyolefins Journal, (), -.
Ghafoorian, M., Joveini, A., Safarzade, S., & Niazmand, H. (2023). Experimental study of passive cooling techniques in an oil-immersed transformer building. Journal of Thermal Analysis and Calorimetry, 148 (24), 14097-14108.
Azadi Moghaddam, M., & Kolahan, F. (2023). Application of simulated annealing algorithm for multi criteria operation planning in flexible manufacturing systems. Scientia Iranica, 0 (0), -.
Kolahan, F. (2023). Investigation of Hardness, Microstructure, and Process Temperature in the Internal Gear Flow-Forming Process. Experimental Techniques, 47 (6), 1169-1182.
Kadkhodayan, M., & Shahraini, S. (2023). A new numerical method for elastic-plastic plate analysis: Theoretical-experimental validation and its application in ratcheting phenomenon. Engineering Analysis with Boundary Elements, 154 (), 64-82.
Moghimi Esfand Abadi, M., & Djavareshkian, M. (2023). Maintenance Grouping Optimization with Air Systems to Improve Risk Management. International Journal of Reliability, Risk and Safety: Theory and Application, 6 (2), 85-91.
Haghighi, B., Passandideh-fard, M. (2023). Modeling the Formation of Thermal Spray Coatings on Substrates with Arbitrary Shapes. Journal of Thermal Spray Technology, 33 (), 551-571.
Afkhami, S., & Pasandidehfard, M. (2023). Experimental and comprehensive investigation of second throat diffuser area effect on ground test of a thrust optimized parabolic nozzle with different expansion ratios. Acta Astronautica, 209 (), 146-158.
Afkhami, S., & Pasandidehfard, M. (2023). Experimental and numerical investigation of transient starting of pre-evacuated exhaust diffuser in high altitude ground test. Aerospace Science and Technology, 133 (), 108111-108126.
Afkhami, S., & Pasandidehfard, M. (2023). Starting transient analysis of second throat exhaust diffuser in high-altitude test of a thrust optimized parabolic nozzle. Physics of Fluids, 35 (6), -.
Afkhami, S., & Pasandidehfard, M. (2023). Evaluation of generalized k-ω turbulence model in strong separated flow estimation of thrust optimized parabolic nozzle. Proceedings of the Institution of Mechanical Engineers - Part G, 237 (14), 3143-3155.
Kamali, H., & Pasandidehfard, M. (2023). Investigating the interaction parameters on ventilation supercavitation phenomena: Experimental and numerical analysis with machine learning interpretation. Physics of Fluids, 35 (11), -.
Moghiman, M. (2023). NUMERICAL SIMULATIONS ON VISIBILITY AND TEMPERATURE IN A CAR PARK OF A COMMERCIAL BUILDING. Journal of Manufacturing Engineering, 18 (4), 141-144.
Al Aridhee, S., & Moghiman, M. (2023). Yearly Energy, Exergy, and Environmental (3E) Analyses of A Photovoltaic Thermal Moduleand Solar Thermal Collector in Series. Al-Khwarizmi Engineering Journal, 19 (1), 36-56.
Javanmardsistani, A., Shariati, M. (2023). Mode-I and II fracture behavior of metal-to-composite bonded interfaces with a graphene nanoplatelet-reinforced structural epoxy adhesive. Proceedings of the Institution of Mechanical Engineers - Part L, 1 (1), 1-19.
Alam Hakakan, H., Amir Reza Askari, & Tahani, M. (2023). Investigating the influence of piezoelectric excitation on the veering phenomenon associated with electrostatically coupled micro-beams. Iranian Journal of Mechanical Engineering Transactions of the ISME, (), -.
Azizi Zade, F., Ghafoorian, M., & Niazmand, H. (2023). Predictive machine learning models for optimization of direct solar steam generation. Journal of Water Process Engineering, 56 (3), 104304-22.
Tahani, M. (2023). A MECHANO-BIOLOGICAL STUDY COMPARING EXTERNAL FIXATION USING MONOCORTICAL AND BICORTICAL PINS IN TIBIAL DIAPHYSEAL FRACTURE MODELS: A FINITE ELEMENT ANALYSIS. Journal of Mechanics in Medicine and Biology, 24 (6), -.
Recent theses and dissertations
Heidarian Loghmani, A. (2023). A numerical study of the first carpometacarpal joint of human hand with magnetic implant. , ( Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Zohoor, M. (2023). Parameter Identification, Process Optimization, and Laboratory Production of Precipitated Calcium Carbonate. , ( Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Momeni-khabisi, H. (2023). Flexo-electric/magnetic effect on size-dependent stability of magnetoelectric micro-nanostructures. , (Doctoral dissertation of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Karamooz, A. (2023). Thermal stress analysis of functionally graded beam reinforced with nanoparticles with a piezoelectric layer on an elastic Foundation. , (Doctoral dissertation of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Shayesteh Zeraati, M. (2023). Interlayer Stress Analysis of Adhesive Joints using Extended Kantorovich Method. , (Doctoral dissertation of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Heidarian Mehr, A. (2023). Examination and Enhancement of Controllability in a Flexible Linear Positioning Mechanism. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Sharifi, S. (2023). Numerical study of energy harvesting from vortex shedding induced behind circular cylinder by piezoelectric. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Sadraee Far, M. (2023). Investigating the effect of simultaneous use of oxide nanoparticles and ultrasonic vibration in Gas Tungsten Arc Welding. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Zyaeiazar, A. (2023). Energy-exergy multi-objective optimization by converting the steam cycle of Shahid Mufattah Thermal Power Plant to a combined cycle. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Moradi, M. (2023). Simulation of the paper waste pollutant removal process in a new solar photocatalytic reactor /. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Alavi, S. (2023). Numerical Investigation of pitching and plunging motion of a hydrofoil using large eddy simulation. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Ghadamkheir, K. (2023). Numerical optimization of a compression ignition direct injection engine operating with hydrogen-blended fuel based on the first and second laws of thermodynamics. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Javdan, B. (2023). Investigating the static strength and fatigue life of defective adhesive joints containing graphene and carbon nanotubes. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Mehr Bagherpour, M. (2023). Numerical Simulation of the Effect of Air Humidity and the Role of Jet Fans in Spreading of Smoke and Flame of Various Fuels in Underground Car Parks. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Golbou, P. (2023). Design and optimization of microjet single-stage axial flow turbine blades. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Kholghi, A. (2023). Numerical Modeling of cooling of surfaces with high thermal flux. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Bashtani, I. (2023). Analysis of the dolphin dorsal fin turbulator in a heat exchanger by hybrid CFD-AI approach. , (Doctoral dissertation of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Alqazzaz, A. (2023). Energy, Exergy, and Economic Analysis of Near-Surface Geothermal Energy and Compression Chillers for Cooling a Building. , (Doctoral dissertation of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Azizi Goodarzi, S. (2023). Studying the effect of cooling on the shock wave intensity around a gas turbine blade. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Zargar Ghochane, S. (2023). Numerical Investigation of the Effects of Icing on a unmanned aerial vehicle (UAV) wing, with and without Winglets, at Low Reynolds Numbers. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Mojarab, A. (2023). Effects of Different Degrees of Carotid Artery Stenosis on Local Hemodynamic Parameters in a Patient-Specific Model by Choosing the Suitable Model for the Artery Wall. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Khodaee Ranjbar, M. (2023). Technical and Economic Analysis of Solar Absorption Chillers with Ground Heat Exchanger and Energy Storage. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Taghinia, G. (2023). Effect of cavitation on the imaging of an optical system immersed in water. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Khorram Nejad, A. (2023). Experimental Investigation of the Simultaneous Effect of Using a Porous Medium, Fan, Phase Change Materials, and Microcapsules in the Cooling of Electronic Components. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Hashemi, J. (2023). Experimental study of cooling effect of jet impingement in electronic chips with high heat flux. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Mirzaei, S. (2023). Utilizing Machine Learning Methods To Simulate The Fast Filling Process In CNG Stations. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Sedighi, A. (2023). Modeling and Thermal Analytical of Numerically and analytically based Laser Metal Deposition Process Parameters on Cooling Rate. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Maloonezhad Absardi, Q. (2023). Formulation and topology optimization of flexures with small deformations. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Hamidi, Z. (2023). Numerical investigation of the effect of the height and location of the building roof chimney on the pollutant dispersion on different environmental conditions. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Derayatifar, M. (2023). Experimental Study of the Performance of Soils from Different Regions of Iran for Direct Solar Steam and Electricity Generation. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Khajegi, S. (2023). Study on the tool wear of the machining process using textured tool. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Aminifar, A. (2023). Numerical improvement of thermal performance of integrated Trombe wall using PCM and nanoparticles in different weather conditions. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Behzadi Moghaddam, A. (2023). Experimental investigation of the effects of microencapsulated phase change material concentration in water base fluid and relative surface roughness on cooling performance index, irreversibility and convection heat transfer coefficient in impingement cooling system. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Suwari, A. (2023). Simulation of the effect of micro vortex generator on film cooling over a stator. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Kheirkhah, M. (2023). Aerodynamic Modeling of Three Sample Cars with Active Aerodynamic Control Methods. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Safamanesh, F. (2023). Numerical simulation of the effect of firefighting positive pressure ventilation fans on fire extinguishing, smoke evacuation and pollutant control in metro station. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Lotfian, A. (2023). Analysis and Investigation of thermal separation of binary mixture using DSMC and machine learning. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Feizi, M. (2023). Theoretical and experimental investigation of the performance of a piezoelectric energy harvester for energy generation from ocean waves. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Radmard, A. (2023). Investigating the Effect of modified Leather on Physical-Mechanical Properties of Polyester Resin. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Alavi Mehr, S. (2023). Nonlinear dynamic analysis of a new flexure mechanism with linear motion. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Kamali, H. (2023). Experimental and numerical investigation of effects of cavitator angle and aft body geometry on the stable artificial cavity characterisrics and extention of results using machine learning methods. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Hadizadeh Esfahani, M. (2023). Inspection and crack detection of powder metallurgy parts using support vector machine and fuzzy logic. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Salari, A. (2023). study effect of jet fan on sprinkler function. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Moghimi Esfand Abadi, M. (2023). Design and optimization of the wing fence of a lambda-shaped aircraft model. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Najimi, M. (2023). parametric study and numerical simulation of flow field, temperature, and humidity for the air conditioning process of solar greenhouse system with underfloor heating. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Zolfaghari, S. (2023). Damage tolerance study of metal-to-composite bonded joints. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Mansouri , M. (2023). Numerical study of thermal performance of geothermal heat exchangers with same length in horizontal and vertical configuration assuming layered soil in Various Spiral, Circular, and helical Arrangements. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Mohammadi, A. (2023). Investigation and Improvement of the Performance of All-Speed AUSM Numerical Family schemes. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Kaffash, A. (2023). Analysis of random vibrations in a single-axis flexible mechanism with limited motion error. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Rabiei, S. (2023). Effects of load frequencies on fatigue life of Al-1100 in air and vacuum environments. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Fareghi, S. (2023). Statistical analysis and optimization of the input parameters of active TIG welding with micro materials on the mechanical properties of stainless steel. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Soltani, S. (2023). Numerical study of effects of using perforated louvered strips on thermal performane of heat exchanger pipes. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Khezri Gharechah, M. (2023). The correction and utilization of nacelle-mounted LIDAR data on horizontal-axis wind turbine, as well as presentation of a power control solution. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Gholinezhad, A. (2023). Numerical Simulation of Dynamic insertion and fixation of hip prosthesis. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Arabpour, R. (2023). Investigating of entropy and entropy generation in micro/nano channels using parallelized DSMC code. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Al-kaabi, A. (2023). Numerical investigation of thermal performance of flat plate solar collectors using porous medium and nanofluid. , (Doctoral dissertation of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Hosseinpour, I. (2023). Experimental study of the effect of manganese on the shape memory behavior of CuAlNi alloy in a controlled a crucible furnace crucible ftmosphere bush furnace. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Shoja, A. (2023). Modeling of the curved rib in the wall of micro combustion chamber with coupled thermophotovoltaic cells. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Sadri Milani, A. (2023). Energy harvesting from galloping-induced vibrations in bladeless wind turbines and investigation of the effects of oscillator body geometry. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Hashemian, D. (2023). Modeling and optimization of electrical discharge machining parameters using regression approach and Meta heuristic simulated annealing algorithm for Inconel 718. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Keshtgar, M. (2023). Analysis of Cumulative Fretting Fatigue Damage Behavior of Al-2024 Alloy Using Thermography Method. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Hoseinpour, M. (2023). Investigating the thermal performance of jet and spray electronic cooling system with crossflow system. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Kafi, K. (2023). Span-wise morphing wing flutter analysis by numerical and analytical methods. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Albu-alzarazeer, A. (2023). Experimental investigation of the effect of Micro-encapsalated pcm slurry on a thermal-photovoltaic system perfomance equipped with twisted tape. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Sirjani, A. (2023). Modeling and optimization of metallurgical characteristics and welding geometry in TIG welding using artificial neural network and innovative algorithms. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Masrouri, A. (2023). Numerical Modeling and Analysis of the Limitations of Geothermal Heat Pipes. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Al-omairi, F. (2023). Experimental investigation of smart noncontinuous thermal photovoltaic system from energy, exergy and economic point of view. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Hafez, M. (2023). Numerical and Experimental Investigation of the Behavior of a Compound Pendulum for Reducing Unwanted Vibrations in Structures. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Olyaei, H. (2023). Isogeometric analysis of beams with arbitrary geometry and variable cross sections. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Atarodi, M. (2023). Design and manufacture of moving magnet magnetic actuator for control of self-excited chatter in boring tools. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Jangi, A. (2023). Stability Analysis of Auxetic Beam Subjected to a nonconservative Force. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Hosseinzadeh, A. (2023). Studying fatigue behavior of aluminum to composite bonded joints after experiencing low-velocity transverse impact. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Al-khafaji, O. (2023). Fabrication Nano-coating for self-Cooling and cleaning Processes for Photovoltaic Panels. , (Master's thesis of Mechanical Engineering). Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad.
Recent research projects
Esmaeili, Ali,jabbari, Hossein (2023). Design and Numerical Simulation of Sweeping Jet System
Policies, rules and governance
Contact Information
Iran, Mashhad, Azadi Square, Ferdowsi University of Mashhad
Faculty of Engineering, Department of Mechanical Engineering
Phone: +985138806055
Fax: +985138806055